卧式电子拉力试验机的控制系统主要包括菜单栏，数据显示窗口，曲线显示窗口，控制窗口。每个窗口都有各自特殊的功用，之前我们介绍过摩擦磨损试验机的控制系统。
Control system of horizontal electronic tensile testing machine mainly includes the menu bar, data display, curve display window, window control. Each window has its own special function, we introduced the control system of friction wear testing machine.
该系列试验机的控制系统与其基本类似，但拉伸试验和摩擦试验测量的数据不一样，因此数据窗口也是不相同的。万能拉力试验机摩擦试验所要显示的数据包括摩擦力，转速，温度，报警等，而拉伸试验所要显示的数据如下：
A control system of the test series and their basic similar, but the tensile test and friction test measurement data are not the same, so the data window is not the same. Universal tensile testing machine friction test to display the data include friction, speed, temperature, alarm, while the tensile test to display the data as follows:

     第一、负荷值测量显示单元：实时显示负荷值的测量值，即试验过程中不同阶段的力值，主要有破型判断、调零、峰值等，按下调零按钮显示值归零，破型判断按钮可切换破断保护功能，而峰值显示试样所能达到的力值。

First, the load value measurement display unit: real-time display of measured load value, namely, the different stages of the test process, mainly has broken judgment, zero, peak value, press the button to display the value zero zero, broken judgment button can switch breaking protection function, and the peak maximum force specimen can achieve the value.

     第二、位移测量显示值：实时显示移动试台的位移测量值，按下调零按钮显示值归零。

Second, the displacement measurement display value: real-time display of displacement measurement of mobiles testing table values, press the button to display the value zero zero.

     第三、变形测量显示值：实时显示引伸计标距内试样的变形测量值，按下调零按钮显示值归零；当变形值达到试样变形值要求时，此时可以摘掉引伸计了，在摘掉引伸计之前须按下摘引伸计按钮使引伸计停止计数，同时，在此期间控制状态处于”负荷保载”。

Third, the deformation measurement display value: real-time display of drawing deformation meter gauge inner values of samples, press the button to display the value zero zero; when the deformation value reaches the specimen deformation value requirements, you can remove the extensometer, at the same time in drawing must be pressed to pick off the extensometer button to make the extensometer stop counting, before during this period, control is in the state of "load holding".

    第四、注意：摘下引伸计重新启动后，位移值代替了变形值，即变形显示表头显示的是位移值！

时间显示窗口：其显示的时间是从按下 启动 按钮，当软件开始采集数据后至试验结束时的时间。注意：在试验过程中力、位移、变形等的 调零 按钮将不起作用。

Fourth, pay attention to: pick the extensometer is restarted, the displacement value instead of the value of deformation, deformation indicator shows the displacement value!

时间显示窗口：其显示的时间是从按下 启动 按钮，当软件开始采集数据后至试验结束时的时间。注意：在试验过程中力、位移、变形等的 调零 按钮将不起作用。

Time display window: the display time is from pressing the start button, when the beginning of the end of data collection software to test time. Note: in the process of test force, displacement, deformation of the zero adjustment button will not work.

产品推荐：数显式编织袋拉力试验机　集装袋拉力试验机  薄膜拉力试验机   橡胶拉力试验机  电线电缆拉力试验机